Round Wire Drawplate for Jewelry Wire Sizing
Draw Round Jewelry Wire to the Size You Need
This round wire drawplate reduces metal wire diameter through a series of graduated round holes. Tungsten carbide drawing inserts sit in a stainless steel plate, with marked sizes to help you follow progressive reductions for jewelry wirework.
Choose the hole range that matches your starting wire and target diameter. The flat, compact plate stores easily at the bench and supports wire preparation for chains, findings and other jewelry projects.
Size Selection Guide
Select a range covering the reductions required for your project. Hole ranges describe wire diameters, not plate dimensions. Each option is a separate drawplate, not a five-plate set.
| Round Hole Range | Approximate Inch Equivalent |
|---|---|
| 0.26 to 2.80 mm | 0.0102 to 0.1102 in |
| 0.26 to 4.10 mm | 0.0102 to 0.1614 in |
| 5.10 to 7.00 mm | 0.2008 to 0.2756 in |
| 2.70 to 5.00 mm | 0.1063 to 0.1969 in |
| 7.10 to 9.00 mm | 0.2795 to 0.3543 in |
For fine wire, compare the 0.26 to 2.80 mm and 0.26 to 4.10 mm options. The 2.70 to 5.00 mm, 5.10 to 7.00 mm and 7.10 to 9.00 mm options cover progressively larger diameters. Work through suitable intermediate holes rather than forcing a large reduction in one pass.
Best For and Not For
| Best For | Not For |
|---|---|
| Jewelry makers preparing round gold, silver or copper wire for chains and findings | Square, half-round or other non-round wire profiles |
| Metalworking studios reducing suitable brass, aluminum or stainless steel wire with appropriate preparation and equipment | Forcing hard or oversized wire through an unsuitable hole |
| Craft makers sizing metal wire and suitable Viking knit work | Drawing plastic materials |
Technical Specifications
| Tool type | Manual round wire drawplate |
| Drawing inserts | Tungsten carbide |
| Plate material | Stainless steel |
| Hole profile | Round |
| Size markings | Engraved diameter markings |
| Available hole ranges | 0.26 to 2.80 mm; 0.26 to 4.10 mm; 5.10 to 7.00 mm; 2.70 to 5.00 mm; 7.10 to 9.00 mm |
| Hole layout for the 0.26 to 4.10 mm option | Four rows with 52 holes |
| Hole Range | Approximate Plate Dimensions | Approximate Weight |
|---|---|---|
| 0.26 to 2.80 mm | 20.4 x 4.7 x 0.6 cm / 8.03 x 1.85 x 0.24 in | 0.39 kg / 0.86 lb |
| 0.26 to 4.10 mm | 20.4 x 5.7 x 0.6 cm / 8.03 x 2.24 x 0.24 in | 0.55 kg / 1.21 lb |
| 5.10 to 7.00 mm | 20.5 x 4.7 x 0.6 cm / 8.07 x 1.85 x 0.24 in | 0.50 kg / 1.10 lb |
| 2.70 to 5.00 mm | 20.5 x 4.7 x 0.8 cm / 8.07 x 1.85 x 0.31 in | 0.54 kg / 1.19 lb |
| 7.10 to 9.00 mm | 20.5 x 4.7 x 0.6 cm / 8.07 x 1.85 x 0.24 in | 0.45 kg / 0.99 lb |
Dimensions and weights above follow the option-specific product images. Sizes are approximate. The 7.10 to 9.00 mm option is listed using its selectable variant range.
Pro Tips
- Secure the plate firmly in a suitable vise or drawing setup before applying pulling force.
- Prepare a tapered wire end that can pass through the selected starting hole.
- Use suitable drawing lubricant and make gradual reductions through successive holes.
- Anneal the wire as appropriate for the alloy and its condition, and stop if resistance increases sharply.
- Handle plate edges carefully, use suitable hand and eye protection, and clean and dry the plate after use.
FAQ
What does a wire drawplate do?
It reduces wire diameter by pulling prepared wire through progressively smaller holes. This plate produces a round profile.
Which size range should I choose?
Choose a range that covers the intermediate sizes between your starting wire and target diameter. Check the hole range rather than choosing by the outside plate dimensions.
Can I use one hole to make a large reduction?
No. Reduce the wire gradually, using suitable lubrication and intermediate holes. Prepare and anneal the wire as appropriate for its alloy.
Can this plate produce square wire or draw plastic?
No. It has round holes and is intended for metal wire, not plastic materials.
Do I receive all five drawplates shown?
No. The order includes one drawplate in the selected hole range. Jewelry and other workshop tools shown are not included.
Who can help me choose a drawplate?
Contact the Musttool team at musttool01@gmail.com with your wire material, starting diameter and target diameter.
What's Included
- One round wire drawplate in the selected hole range
Support
Questions about hole range selection, wire compatibility or order status? Contact the Musttool team at musttool01@gmail.com. We respond within 24 hours on business days.