4-in-1 Manual Jewellery Rolling Mill with blue cast iron frame, forged chrome steel rollers, side handle, and semicircular groove replacement roller, shown on white background
4-in-1 Manual Jewellery Rolling Mill core features showing flat sheet, round wire, square wire, and half-round wire rolling capability, 0.1-7mm thickness range, 1:2.5 gear ratio, heavy-duty cast iron frame with forged chrome steel rollers, and up to 40mm sheet width
4-in-1 Manual Jewellery Rolling Mill how-to-use guide showing 6 steps: secure to bench, anneal the metal, adjust roller gap, feed sheet or wire, turn the handle slowly, and repeat passes to finish, with safety note to reduce thickness gradually and anneal between passes
4-in-1 Manual Jewellery Rolling Mill in use in a jewelry studio with a jeweler feeding a copper sheet through the blue rolling mill, showing sheet reduction, wire forming, texture transfer, and endless possibilities applications
4-in-1 Manual Jewellery Rolling Mill package contents including 1 rolling mill machine, 1 semicircular groove replacement roller, 1 upper and lower thickness adjustment handle, 1 round washer, 1 small shim, 1 handgrip, 2 fasteners, and 1 screw
4-in-1 Manual Jewellery Rolling Mill technical parameters showing dimensions 295x345x135mm, thickness range 0.1-7mm, sheet capacity 1-40mm wide, gear ratio 1:2.5, weight 17.28kg/38.1lb, and 4-in-1 design with flat, half-round, round, and wire interchangeable rollers
4-in-1 Manual Jewellery Rolling Mill suitable and not suitable comparison: suitable for flat sheet rolling, round wire reduction, square wire forming, half-round wire forming, texture transfer, and gold, silver, copper, brass, and bronze; not suitable for steel or hardened metals, sheet wider than 40mm, high-volume continuous production, or use without secure bench mounting

4-in-1 Manual Jewellery Rolling Mill | Flat Sheet, Round and Square Wire Mill

€9.999,00 EUR
Quantity:
American Express Apple Pay Diners Club Discover Google Pay JCB Maestro Mastercard PayPal Union Pay Visa

A heavy-duty 4-in-1 manual jewellery rolling mill for professional studios, repair benches and metalsmithing classrooms. Roll flat sheet and form round, square or half-round wire in one compact, bench-mounted machine — no electricity required.

Built with forged chrome-steel rollers and a rigid cast-iron frame, this mill delivers the strength and stability needed for consistent, repeatable results with gold, silver, copper, brass and bronze.

Best For / Not For

Best For Not For
Professional jewellery studios needing flat sheet and wire forming in one machine Rolling hardened steel, stainless steel or titanium
Metalsmithing students and jewellery-making classrooms High-volume production requiring motorised or powered mills
Repair benches preparing ring shanks, bezels, ear wires and pendants Workshops without a stable, fixed workbench for mounting
Texture transfer onto annealed non-ferrous sheet Rolling work-hardened metal without annealing first

Technical Specifications

Rolling functions Flat sheet, round wire, square wire, half-round wire
Gear ratio 1:2.5
Adjustable roller opening Approx. 0.1–7mm
Flat-sheet capacity Approx. 1–40mm wide
Round-wire grooves 2 / 2.5 / 3.5 / 4.5 / 5.5 / 6.5mm
Square-wire grooves 1 / 1.5 / 2.5 / 3 / 4 / 5 / 6mm
Half-round grooves 2 / 2.5 / 3 / 3.5 / 4.5 / 5 / 7.5 / 9 / 10mm
Roller material Forged chrome steel
Frame material Cast iron with powder-coated finish
Machine dimensions Approx. 345 x 135 x 295mm (13.6 x 5.3 x 11.6 in)
Machine weight Approx. 17.28kg (38.1 lb)
Suitable metals Gold, silver, copper, brass, bronze and compatible non-ferrous metals
Power supply Not required — manual hand crank

Pro Tips

  • Reduce thickness by no more than 10–15% per pass for a clean surface finish and longer roller life.
  • Always anneal metal before rolling and re-anneal after several passes to prevent cracking.
  • Feed the workpiece in the same direction each time to maintain a consistent surface finish.
  • Apply a thin protective oil to the rollers after each session to prevent corrosion — wipe off before the next use.
  • Use a scrap piece of the same metal to test your roller gap setting before committing to your final workpiece.

FAQ

What does "4-in-1" mean?
The machine rolls flat metal sheet and forms three wire profiles — round, square and half-round — without needing separate mills.

What metals can it process?
It is designed for annealed gold, silver, copper, brass, bronze and other compatible non-ferrous jewellery metals. Do not use it on hardened steel, stainless steel or titanium.

What does the 0.1–7mm range refer to?
This is the adjustable opening between the rollers. The available finished wire sizes are determined by the individual grooves, not a continuous range across all profiles.

Does the metal need to be annealed first?
Yes. Annealing softens the metal for easier rolling and reduces the risk of cracking. Re-anneal after several passes as the metal work-hardens.

Can it transfer textures onto metal sheet?
Yes, compatible texture materials can be transferred using the flat rollers. Be aware that hard or contaminated texture materials can permanently mark the roller surface.

What if I receive a damaged unit or missing parts?
Contact the Musttool team at musttool01@gmail.com with your order number and photos. We respond within 24 hours on business days.

What's Included

  • 1 x 4-in-1 Manual Jewellery Rolling Mill
  • 1 x Hand Crank Arm
  • 1 x Handgrip
  • 1 x Upper and Lower Thickness Adjustment Handle
  • 1 x Semicircular Groove Replacement Roller
  • 1 x Round Washer
  • 1 x Small Shim
  • 2 x Fasteners
  • 1 x Screw

Package contents may be updated without prior notice. Please check the latest product images before ordering if a specific accessory is essential.

Support

Questions about this rolling mill or order status? Contact the Musttool team at musttool01@gmail.com. We respond within 24 hours on business days.