Flex Shaft Rotary Tool | 230W 18000RPM | 110V and 220V | Foot Pedal Control
About This Flex Shaft Rotary Tool
This hang-up flex shaft rotary tool delivers foot-controlled power to a lightweight handpiece for detailed grinding, polishing, carving, and finishing. The 230W motor hangs above or beside the bench and drives the handpiece through a 100 cm flexible shaft, keeping motor weight off your hand during precision bench work.
The included foot pedal provides stepless speed control up to 18,000 RPM, leaving both hands free to hold the workpiece and guide the tool. The three-jaw chuck accepts compatible 0-5 mm accessory shanks. Forward and reverse rotation are supported. Available in 110V and 220V — select the version that matches your local power supply.
Voltage Selection Guide
| Check Before Ordering | What to Confirm |
|---|---|
| Power supply | Select 110V or 220V to match your actual local supply. Both versions are rated for 50/60Hz. |
| Plug and outlet | Confirm outlet compatibility before use; do not rely on voltage alone. |
| Accessory shank | Use only accessories with shanks within the confirmed 0-5 mm chuck range. |
| Bench setup | Provide a secure hanging point and route the flexible shaft in a smooth curve without sharp bends. |
Best For / Not For
| Best For | Not For |
|---|---|
| Jewelry polishing and surface finishing | Heavy stock removal better suited to a large grinder |
| Small metal parts and detailed texturing | Accessories with shanks larger than 5 mm |
| Wood or stone detail carving with suitable bits | Work without a secure motor hanging point |
| Bench work needing hands-free foot speed control | Use on an unmatched power supply voltage |
| Reaching small or awkward areas on workpieces | Automatic or unattended material processing |
Technical Specifications
| Product Type | Hang-up flex shaft rotary tool |
| Voltage Options | 110V or 220V |
| Frequency | 50/60Hz |
| Power | 230W |
| Maximum Speed | 18,000 RPM |
| Rotation | Forward and reverse |
| Chuck Range | 0-5 mm / 0-0.2 in |
| Flexible Shaft Length | 100 cm / 39.4 in |
| Speed Control | Stepless foot pedal |
| Weight | Approx. 3.5 kg / 7.7 lb |
Pro Tips
- Hang the motor securely and keep the flexible shaft in a broad, natural curve before switching on — avoid sharp bends that can cause premature wear.
- Insert the accessory shank fully for secure clamping, then tighten the three-jaw chuck evenly with the supplied key.
- Start at a low pedal setting and increase speed gradually to suit the accessory, material, and operation.
- Let the motor stop completely before switching between forward and reverse rotation.
- Keep ventilation openings clear and inspect the shaft, handpiece, chuck, and cables regularly for wear or damage.
FAQ
Which voltage version should I choose?
Choose 110V or 220V to match your actual local power supply. Also confirm outlet and plug compatibility before use.
How is the speed controlled?
The included foot pedal provides stepless speed control up to 18,000 RPM, keeping both hands free for the handpiece and workpiece.
Can the motor run in both directions?
Yes. Forward and reverse rotation are supported. Stop the motor completely before changing direction.
Which accessories fit the handpiece?
The three-jaw chuck accepts compatible shanks from 0 to 5 mm. Verify each accessory's material suitability and rated speed before use.
Are grinding bits or polishing wheels included?
No rotary accessories are included. Select suitable bits, burs, wheels, brushes, or consumables separately based on your task.
Does the package include a hanging stand?
A stand is not included. Plan for a secure hanging point suitable for the motor weight and operating load before setup.
What's Included
- 1 x flex shaft motor (110V or 220V)
- 1 x handpiece
- 1 x flexible shaft (100 cm)
- 1 x ABS foot pedal
- 1 x chuck key
- 1 x instruction manual
Support
Questions about voltage compatibility, setup, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.