Hang-Up Flex Shaft Motor | Jewelry Polishing and Engraving Machine
The Foredom CC-30 is a 300W hang-up flex shaft motor designed for jewellers, engravers, and bench craftspeople who need precise, hands-free speed control. With up to 20,000 RPM and a variable foot pedal, it keeps both hands free for detailed work.
The motor hangs above the bench, transferring rotation through a 100 cm flexible shaft to a lightweight metal handpiece. The three-jaw chuck accepts shanks from 0 to 5 mm, covering a wide range of rotary bits, burrs, and polishing tools.
Voltage Selection Guide
Best For / Not For
| Best For | Not For |
|---|---|
| Jewellery polishing, texturing, and fine finishing | Heavy stock removal requiring a large bench grinder |
| Engraving, deburring, and small-part detailing | Accessories with shanks larger than 5 mm |
| Wood, model, and craft carving with suitable bits | Workplaces without a secure overhead mounting point |
| Bench work where foot-controlled speed aids precision | Use with a voltage that does not match the selected version |
| Tasks requiring a lightweight handpiece for control | Processes requiring a specified torque or certified duty cycle |
Technical Specifications
| Power | 300W |
| Voltage | 110V or 220V (select version) |
| Frequency | 50/60 Hz |
| Maximum Speed | 20,000 RPM |
| Speed Control | Variable foot pedal |
| Chuck Range | 0–5 mm (0–0.2 in) |
| Flexible Shaft Length | 100 cm (39 in) |
| Motor Dimensions | 8.5 cm dia. x 12 cm H (3.35 x 4.72 in) |
| Weight | Approx. 3 kg (6.6 lb) |
Pro Tips
- Hang the motor so the shaft reaches the work in a relaxed curve — avoid sharp bends or tight pulls that stress the cable.
- Confirm the selected voltage before connecting power; the 110V and 220V versions are not interchangeable.
- Clamp each accessory securely with the chuck key and verify it runs true at low speed before increasing RPM.
- Match accessory type and speed to the material — start low and increase gradually rather than running at maximum from the start.
- Disconnect power before changing accessories or inspecting the chuck, shaft, handpiece, or cable.
FAQ
Is this a dual-voltage motor?
No. It is offered in separate 110V and 220V versions. Select the version that matches your workshop power supply before ordering — using the wrong voltage will damage the motor.
What accessory shank sizes fit the handpiece?
The three-jaw chuck accepts shanks from 0 to 5 mm (0–0.2 in). Confirm each accessory is also rated for the intended task and operating speed.
Does it come with a stand or mounting hardware?
A secure hook, arm, or stand above the work area is required but not confirmed as included. Ensure you have a suitable mounting point before use.
Are rotary bits or polishing accessories included?
No rotary bits, burrs, polishing wheels, sanding drums, or consumables are included. These are selected separately based on your material and task.
How is speed controlled?
The included foot pedal varies motor speed from 0 up to 20,000 RPM, keeping both hands free to hold the handpiece and workpiece.
What if I have questions about my order or need support?
Questions about setup, compatibility, or order status? Contact the Musttool team at musttool01@gmail.com. We respond within 24 hours on business days.
What's Included
- 1 x 300W hang-up flex shaft motor (110V or 220V as selected)
- 1 x Handpiece with three-jaw chuck
- 1 x 100 cm (39 in) flexible shaft
- 1 x Variable-speed foot pedal
- 1 x Chuck key
- 1 x Instruction manual
Support
Questions about setup, compatibility, or order status? Contact the Musttool team at musttool01@gmail.com. We respond within 24 hours on business days.